Well this time
“I will show you how to mold”
How is lure molding done?
The lure of “rein to pencil” is a lamination type, so it requires some tricks in the molding process to evenly align both sides.
This time, I will introduce these processes one by one.
It will surely help you make your lure.
I will introduce my original molding method.
First of all,
we will remove the irregularities and prepare them.
A paper file may be used, but a stick file is much easier to work with.
How to make a pattern is introduced in this article.
I will sharpen it with knife and a file.
Rough molding is completed in this process.
Next, I will move on to more detailed molding.
First of all, make a border with tape as shown in the image,
and cut it little from the tap.
Masking tape is recommended.
Replace the tape as shown in the image above and enter the lower mold.
Replace the tape as shown in the image above and enter the center molding.
Repeat the adjustment from various angles.
Once it has been prepared to some extent,
I will replace it with a finer file.
This completes the entire process.
From here, we will strengthen the base and add design.
Rather, there are many better ways.
Also, in the present era, the hollowing out method seems to be more mainstream than the bonding.
I am proud of the lure I made this way,
which I have repeatedly failed,
and I will continue to produce better works.
#4c kanseihome coco2 216-4
azaminatogawa yaesetyou simajirigun okinawa